Skip to main content
state-guide

South Carolina Well Permit and NOI Requirements

A south carolina well permit requires a Notice of Intent (NOI) filed before drilling and an LLR-licensed driller with a $25,000 surety bond. Complete guide to SC well permitting.

Septic & Well Pro Editorial Team
November 4, 2026 · 10 min read
South Carolina Well Permit and NOI Requirements
On this page (18)
Need a South Carolina pro? Get up to 3 free quotes.

Getting a south carolina well permit is one of the first steps any homeowner must take before drilling a private water well. South Carolina regulates well construction through a combination of state agencies and licensing requirements designed to protect both the homeowner's water supply and the broader groundwater resources that serve the entire state. The process revolves around two key requirements: a Notice of Intent (NOI) filed with the South Carolina Department of Environmental Services (SCDES), and hiring a driller licensed by the Department of Labor, Licensing and Regulation (LLR).

This guide walks through every step of the south carolina well permit process, from the initial NOI filing through construction, testing, and completion. Whether you are building a new home in a rural area without public water, replacing an existing well that has gone dry, or drilling an irrigation well for agricultural use, the permitting requirements are consistent across all 46 counties.

The Notice of Intent (NOI) Requirement

South Carolina does not issue a traditional "well permit" in the way that some states do. Instead, the state uses a Notice of Intent (NOI) system. Before any well drilling begins, the licensed driller must file an NOI with SCDES. The NOI notifies the state that a well will be drilled at a specific location and provides essential information about the proposed well, including the property address, the intended use (domestic, irrigation, industrial), the expected depth, and the drilling method to be used.

The NOI must be filed at least 5 business days before drilling begins. This waiting period gives SCDES the opportunity to review the proposed well location against known contamination sites, nearby wells, and setback requirements. If SCDES identifies a potential conflict — such as proximity to a known contamination plume or an improperly abandoned well — they can contact the driller before work begins to address the issue.

What the NOI Must Include

The NOI form requires the following information, which your licensed driller typically completes on your behalf:

  • Property owner's name and contact information
  • Property address and tax map number
  • GPS coordinates of the proposed well location
  • Intended use of the well (domestic, irrigation, industrial, monitoring)
  • Proposed depth and drilling method
  • Driller's license number and company information
  • Distance to nearest septic system, property line, and other potential contamination sources

The driller is responsible for filing the NOI, not the property owner. However, as the property owner, you should verify that your driller has filed the NOI before work begins. Drilling without a filed NOI is a violation of R.61-71 and can result in penalties for the driller and complications for the property owner.

LLR Licensing Requirements for Well Drillers

South Carolina requires all well drillers to hold a license from the Department of Labor, Licensing and Regulation (LLR). The licensing system is one of the most rigorous in the Southeast, classifying drillers into four categories based on the types of wells they are authorized to construct.

License ClassAuthorized Well TypesRequirements
Class AAll well types including public supply5 years experience, exam, $25,000 bond
Class BDomestic, irrigation, and monitoring wells3 years experience, exam, $25,000 bond
Class CMonitoring and test wells only2 years experience, exam, $25,000 bond
Class DBored wells (hand-dug) under 100 feet1 year experience, exam, $25,000 bond

The $25,000 Surety Bond Requirement

Every licensed well driller in South Carolina must maintain a $25,000 surety bond on file with LLR. This bond provides financial protection for property owners if the driller performs substandard work, fails to complete the project, or does not properly abandon a well. The bond requirement is one of South Carolina's strongest consumer protections in the well drilling industry.

Before hiring a driller, you can verify their license status and bond standing through LLR's online license verification system. Always verify that the driller's license is current and that their bond is active. A driller operating without a valid license or bond is violating state law, and any well they construct may not meet code requirements.

R.61-71: South Carolina's Well Construction Standards

All well construction in South Carolina must comply with Regulation R.61-71, the state's comprehensive well construction standard. This regulation, now administered by SCDES following the DHEC to SCDES transition, establishes minimum requirements for every aspect of well construction, from casing materials to grout specifications to setback distances. For a detailed breakdown of R.61-71 requirements, see our South Carolina well water standards R.61-71 guide.

Minimum Setback Distances

R.61-71 establishes minimum horizontal distances between a well and potential contamination sources. These setbacks are non-negotiable and must be verified before drilling begins.

Contamination SourceMinimum Setback
Septic tank50 feet
Septic drain field100 feet
Property line5 feet
Livestock enclosure100 feet
Petroleum storage tank100 feet
Chemical storage100 feet
Public road right-of-way10 feet
Building foundation5 feet

The 100-foot setback from septic drain fields is particularly important in rural South Carolina, where both septic systems and private wells are common on the same property. On smaller lots, meeting this setback while also satisfying the septic system's own setback requirements can be challenging. In cases where setbacks cannot be met, a variance may be requested from SCDES, but variances are granted only in exceptional circumstances and typically require additional well construction safeguards.

Well Construction Specifications by Region

South Carolina's geological diversity means that well construction methods and specifications vary significantly from one region to another. The state spans from the crystalline rock formations of the Upstate Piedmont to the deep sedimentary aquifers of the Coastal Plain, and each geological environment demands different drilling techniques, casing materials, and completion methods.

Piedmont Region (Upstate)

In the Piedmont, wells are typically drilled through weathered rock (saprolite) and into fractured crystalline bedrock. These wells are usually cased with steel through the saprolite layer and left as open boreholes in the bedrock, where water enters through fractures. Typical depths range from 150 to 400 feet, and yields are highly variable — a well on one side of a ridge may produce 20 gallons per minute while a well 100 feet away produces 2 gallons per minute. Rotary drilling is the standard method, and costs in the Piedmont tend to be higher due to the hard rock formations.

Sandhills Region (Central)

The Sandhills represent a transition zone between the Piedmont and Coastal Plain. Wells in this region are typically completed in sand aquifers at moderate depths of 100 to 250 feet. Construction usually involves PVC or steel casing with a screened interval set opposite the producing sand layer. Yields are generally more predictable than in the Piedmont, and drilling costs are moderate.

Coastal Plain (Lowcountry and Pee Dee)

The Coastal Plain offers the most favorable conditions for well drilling in South Carolina. Multiple sand and limestone aquifers at various depths provide reliable water supplies. Wells are typically completed with PVC casing and screened intervals, with depths ranging from 50 to 300 feet depending on the target aquifer. The Floridan aquifer, accessible in parts of the southern Coastal Plain, is one of the most productive aquifers in the Southeast. Drilling costs are generally lowest in this region due to the soft formations.

Well Abandonment Requirements

South Carolina law requires that any well taken out of service must be properly abandoned according to R.61-71 standards. Proper abandonment involves filling the well from bottom to top with bentonite grout or cement grout to prevent the well from serving as a conduit for surface contamination to reach groundwater. Abandonment must be performed by a licensed driller, and the driller must file an abandonment record with SCDES.

Improperly abandoned wells — those left open, loosely capped, or filled with debris — are one of the most common sources of groundwater contamination in South Carolina. If you have an old well on your property that is no longer in use, getting it properly abandoned protects your water supply, your neighbors' water supplies, and the broader aquifer system. SCDES can provide guidance on abandonment requirements, and your local well drilling professionals can provide cost estimates for the work.

Costs Associated with Well Permits in South Carolina

The NOI filing itself does not carry a separate fee — the cost is typically included in the driller's overall project price. However, the total cost of drilling a well in South Carolina includes several components beyond the drilling itself. For a comprehensive cost breakdown by region, see our South Carolina well drilling cost guide.

Cost ComponentTypical RangeNotes
Well drilling$3,500–$12,000Varies by depth, geology, and region
Well pump and pressure tank$1,500–$3,500Submersible pump standard for deep wells
Water quality testing$100–$300Bacteria, nitrates, basic minerals at minimum
NOI filingIncludedFiled by driller, typically part of drilling cost
Well abandonment (if replacing)$500–$2,000Required for any well taken out of service

Frequently Asked Questions

Do I need a permit to drill a well in South Carolina?

South Carolina uses a Notice of Intent (NOI) system rather than a traditional permit. Your licensed driller must file an NOI with SCDES at least 5 business days before drilling begins. The NOI serves a similar function to a permit by notifying the state of the proposed well and allowing review of the proposed location. Drilling without an NOI is a violation of R.61-71.

Can I drill my own well in South Carolina?

No. South Carolina law requires all well drilling to be performed by a driller licensed through LLR. The licensing requirement exists to protect groundwater resources and ensure proper well construction. Even hand-dug (bored) wells under 100 feet require a Class D license. Hiring an unlicensed driller puts you at risk of code violations, contamination, and loss of the $25,000 surety bond protection.

How deep do wells need to be in South Carolina?

There is no statewide minimum depth requirement. Well depth depends on the local geology and the depth to a productive aquifer. Coastal Plain wells may produce adequate water at 50 to 100 feet, while Piedmont wells commonly need 200 to 400 feet to reach productive fracture zones. Your driller should be familiar with local conditions and expected depths in your area.

How long does the South Carolina well permit process take?

The NOI requires a 5 business day waiting period before drilling can begin. In most cases, this is the only regulatory delay. Total project timeline from NOI filing through well completion, pump installation, and water testing typically runs 2 to 4 weeks, depending on driller availability and site conditions. Peak drilling season from spring through fall may involve longer waits for driller scheduling.

What happens if my well doesn't produce enough water?

South Carolina requires a yield test as part of well completion, but there is no guaranteed minimum yield. If a well does not produce adequate water, the driller may recommend deepening the well, hydrofracturing (pressurizing fractures to increase flow), or drilling a second well at a different location. The $25,000 surety bond does not guarantee water production — it protects against substandard construction practices. Discuss low-yield contingencies with your driller before work begins and review our South Carolina well water quality guide for more on water testing.

Find South Carolina providers

Connect with local professionals in South Carolina for your septic or well water needs.

Get free quotes

Related reading